From 8339feb5ce199126c020ef05571e3ad0600a1a9f Mon Sep 17 00:00:00 2001
From: scottc <scottc@scottc.net>
Date: Sat, 12 Oct 2024 02:19:26 +0000
Subject: [PATCH] Delete config/printer-20240901_185056.cfg

---
 config/printer-20240901_185056.cfg | 172 -----------------------------
 1 file changed, 172 deletions(-)
 delete mode 100644 config/printer-20240901_185056.cfg

diff --git a/config/printer-20240901_185056.cfg b/config/printer-20240901_185056.cfg
deleted file mode 100644
index 13ae29f..0000000
--- a/config/printer-20240901_185056.cfg
+++ /dev/null
@@ -1,172 +0,0 @@
-# This file contains common pin mappings for the 2018 Creality
-# Ender 3. To use this config, the firmware should be compiled for the
-# AVR atmega1284p.
-
-# Note, a number of Melzi boards are shipped with a bootloader that
-# requires the following command to flash the board:
-#  avrdude -p atmega1284p -c arduino -b 57600 -P /dev/ttyUSB0 -U out/klipper.elf.hex
-# If the above command does not work and "make flash" does not work
-# then one may need to flash a bootloader to the board - see the
-# Klipper docs/Bootloaders.md file for more information.
-
-[include mainsail.cfg]
-
-[include scottc.cfg]
-
-# See docs/Config_Reference.md for a description of parameters.
-
-[stepper_x]
-step_pin: PD7
-dir_pin: !PC5
-enable_pin: !PD6
-microsteps: 16
-rotation_distance: 40
-endstop_pin: ^PC2
-position_endstop: 0
-position_max: 235
-homing_speed: 50
-
-[stepper_y]
-step_pin: PC6
-dir_pin: !PC7
-enable_pin: !PD6
-microsteps: 16
-rotation_distance: 40
-endstop_pin: ^PC3
-position_endstop: 0
-position_max: 235
-homing_speed: 50
-
-[stepper_z]
-step_pin: PB3
-dir_pin: PB2
-enable_pin: !PA5
-microsteps: 16
-rotation_distance: 8
-endstop_pin: probe:z_virtual_endstop
-position_max: 250
-
-[extruder]
-max_extrude_cross_section: 200 ### DELETE ME?
-max_extrude_only_distance: 100.0
-step_pin: PB1
-dir_pin: !PB0
-enable_pin: !PD6
-microsteps: 16
-rotation_distance: 23.046
-nozzle_diameter: 0.600
-filament_diameter: 1.750
-heater_pin: PD5
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PA7
-min_temp: 0
-max_temp: 250
-
-[heater_bed]
-heater_pin: PD4
-sensor_type: EPCOS 100K B57560G104F
-sensor_pin: PA6
-min_temp: 0
-max_temp: 80
-
-[fan]
-pin: PB4
-
-[mcu]
-serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
-baud: 250000
-
-[printer]
-kinematics: cartesian
-max_velocity: 300
-max_accel: 3000
-max_z_velocity: 5
-max_z_accel: 100
-
-[bed_screws]
-screw1: 30.5, 37
-screw2: 30.5, 207
-screw3: 204.5, 207
-screw4: 204.5, 37
-
-[display]
-lcd_type: st7920
-cs_pin: PA3
-sclk_pin: PA1
-sid_pin: PC1
-encoder_pins: ^PD2, ^PD3
-click_pin: ^!PC0
-
-# The print bed can move so far to the front, that the nozzle can reach the
-# plastic cover of the print bed heater cable (only when the bed is moved by
-# hand). By homing the Y axis before the X axis, it is ensured the nozzle will
-# not melt through the plastic part.
-# BEWARE: You will lose the ability to home axes individually. The printer will
-# always home all axes for every G28 command.
-#[homing_override]
-#gcode:
-# G28 Y0
-# G28 X0
-# G28 Z0
-
-[bltouch]
-sensor_pin: ^PC4
-control_pin: PA4
-x_offset: -40.00
-y_offset: -8.00 
-z_offset: 2.60
-
-[safe_z_home]
-home_xy_position: 162, 125 # Change coordinates to the center of your print bed
-speed: 50
-z_hop: 10                 # Move up 10mm
-z_hop_speed: 5
-
-[bed_mesh]
-speed: 120
-horizontal_move_z: 5
-mesh_min: 20, 20
-mesh_max: 195, 220
-mesh_pps: 2, 2
-probe_count: 8,8
-algorithm: bicubic
-fade_start: 1
-fade_end: 10
-fade_target: 0
-
-#*# <---------------------- SAVE_CONFIG ---------------------->
-#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
-#*#
-#*# [heater_bed]
-#*# control = pid
-#*# pid_kp = 64.222
-#*# pid_ki = 1.278
-#*# pid_kd = 806.790
-#*#
-#*# [extruder]
-#*# control = pid
-#*# pid_kp = 26.561
-#*# pid_ki = 1.476
-#*# pid_kd = 119.524
-#*#
-#*# [bed_mesh default]
-#*# version = 1
-#*# points =
-#*# 	  0.027500, 0.022500, -0.012500, -0.017500, -0.042500, -0.050000, -0.047500, -0.035000
-#*# 	  0.062500, 0.047500, 0.015000, 0.010000, -0.022500, -0.030000, -0.027500, -0.037500
-#*# 	  0.110000, 0.100000, 0.050000, 0.037500, -0.010000, -0.022500, -0.027500, -0.035000
-#*# 	  0.117500, 0.105000, 0.065000, 0.037500, 0.000000, -0.007500, -0.022500, -0.022500
-#*# 	  0.132500, 0.112500, 0.072500, 0.055000, 0.017500, -0.007500, -0.017500, -0.025000
-#*# 	  0.152500, 0.125000, 0.087500, 0.060000, 0.025000, 0.005000, -0.002500, -0.010000
-#*# 	  0.105000, 0.102500, 0.062500, 0.045000, 0.022500, 0.015000, 0.015000, 0.025000
-#*# 	  0.100000, 0.087500, 0.055000, 0.055000, 0.032500, 0.025000, 0.037500, 0.035000
-#*# x_count = 8
-#*# y_count = 8
-#*# mesh_x_pps = 2
-#*# mesh_y_pps = 2
-#*# algo = bicubic
-#*# tension = 0.2
-#*# min_x = 20.0
-#*# max_x = 195.0
-#*# min_y = 20.0
-#*# max_y = 219.99